Strange Prob. When Uppd. To 12611 On Xenon, Tried everything, help appreciated
Hi all
Have uppdated alot of boxes to 12611 without any prob.
But this time I´m stuck.
I´m helping a friend to uppdate from 9199 to latest 12611.
The nand have bad block on:
Degraded info:
Bad Block @ 0x1C8
Block 0x1C8 founx at 0x3ff
So first I dumped his nand with flash360 two times.
Both times flash360 gave me an error on reading, don´t remember what it said but i figured it
was the bad block.
I compared the two dumps and they were identical.
I then used freeBOOT_ToolBox_Maker26 to create freeboot image but it won´t work.
Says my nand is corrupt, same goes for Jtag tool 2.20 and easy freeboot 12611.
So instead I used his backup of the first original dump with bad block.
This time Freeboot Toolbox created the nand.
When I check nand info with Xnand Healer GUI 0.6 There´s no bad blocks.
So i flashed the nand with xellous from my usb key.
But the box just shows the bootup animation (12611) then nothing.
So I fixed the badblock on the freeboot image that I got from FreeBoot Toolbox as follows:
nandpro 12611.bin: -r16 1c8.bin 1c8 1
nandpro 12611.bin: -w16 1c.bin 3ff 1
Then flashed it again.
Same problem.
When checking my image with 360 flash tool v0.95 it sais cb:1903 on my original bin file but on my freeboot image it says 1921, don´t know if this is important or not.
Also tried manualy choosing motherboard type in Freeboot toolbox maker but gives same result.
One more thing.
If I flash back the 9199 image everything works fine.
And xellous allways works but the dash won´t boot after logo animation..
help appreciated
/Jeppa
(Går bra att svara på svenska, jag har sedan tidigare postat på xbox-scene men inte fått svar, orkade inte skriva om all text ;)
