Hur det kommer se ut i framtiden med LT+
Nedan ser ni den senaste infon från c4evaspeaks.com från idag (2011-06-02) jag kommer uppdatera listan lite då och då när jag ser något nytt, det är enorm trafik till sidan just nu hela tiden så sidan är ganska seg, tänkte att detta kanske kan hjälpa lite så att inte sidan helt plötsligt går ner sig helt pga trafiken :rolleyes:
Översättning kommer så småningom...
Citat:
Original inlägg av www.c4evaspeaks.com
Join us in the new official IRC channel for news/discussion of c4eva’s firmware (#c4e on EFnet IRC). Please note that it is for serious users only, and those who ask stupid questions or post nonsense without doing some reading beforehand are not welcome.
Hitachi GDR-3120L
LT+ v1.1 RELEASED
All versions of Hitachi, except 78 and 79, do not have AP2.5 but were updated to conform to LT+ standards
Samsung TS-H943
LT RELEASED
This version is safe with all dashboards up to 2.0.12625.0 – Not deemed live-safe with dashes newer than this.
LT+ v1.9 RELEASED
This version is for dashboard version 2.0.13146.0 – It will have no XGD3 backup support but will be based on the latest firmware as updated by the new dashboard update.
LT+ v2.0 IN PROGRESS
This version is for dashboard version 2.0.13146.0 – It is planned to have XGD3 backup support. No more info provided until after v1.9 is released.
BenQ VAD6038
LT+ v1.1 RELEASED
This version is safe with all dashboards up to 2.0.12625.0 – Not deemed live-safe with dashes newer than this.
LT+ v1.9 RELEASED
This version is for dashboard version 2.0.13146.0 – It will have no XGD3 backup support but will be based on the latest firmware as updated by the new dashboard update.
LT+ v2.0 IN PROGRESS
This version is for dashboard version 2.0.13146.0 – It is planned to have XGD3 backup support. No more info provided until after v1.9 is released.
Lite-On DG-16D2S
LT+ v1.1 RELEASED
This version is safe with all dashboards up to 2.0.12625.0 – Not deemed live-safe with dashes newer than this.
LT+ v1.9 RELEASED
This version is for dashboard version 2.0.13146.0 – It will have no XGD3 backup support but will be based on the latest firmware as updated by the new dashboard update.
LT+ v2.0 IN PROGRESS
This version is for dashboard version 2.0.13146.0 – It is planned to have XGD3 backup support. No more info provided until after v1.9 is released.
Lite-On 9504 DG-16D4S
LT+ v1.0 RELEASED
This version is safe with all dashboards up to 2.0.12625.0 – Not deemed live-safe with dashes newer than this.
LT+ v1.9 IN PROGRESS
This version is for dashboard version 2.0.13146.0 – It will have no XGD3 backup support but will be based on the latest firmware as updated by the new dashboard update.
LT+ v2.0 IN PROGRESS
This version is for dashboard version 2.0.13146.0 – It is planned to have XGD3 backup support. No more info provided until after v1.9 is released.
Lite-On 0225
LT+ IN TESTING
Lite-On 0225 drives are write protected. There is a new drive unlock kit that is being released by Xecuter which will allow these drives to be flashed. This drive has not had its firmware updated with the new dashboard. As this drive has not been updated by the new dashboard, it is undetermined which LT+ version it will be. The only certainty is that there will be a new LT+ for this drive
Lite-On 0401
LT+ IN PROGRESS
Lite-On 0401 drives are write protected. There is a new drive unlock kit that is being released by Xecuter which will allow these drives to be flashed. This drive has not had its firmware updated with the new dashboard. As this drive has not been updated by the new dashboard, it is undetermined which LT+ version it will be. The only certainty is that there will be a new LT+ for this drive
Lite-On 1071
LT+ IN PROGRESS
Lite-On 1071 drives are write protected. There is a new drive unlock kit that is being released by Xecuter which will allow these drives to be flashed. This drive has not had its firmware updated with the new dashboard. As this drive has not been updated by the new dashboard, it is undetermined which LT+ version it will be. The only certainty is that there will be a new LT+ for this drive
The kit is permanent, and is 1 per drive and cannot be removed.
There will be a Pro Modders kit for professional installers that will be around $20.
There will be an EZ-Fit No-Solder kit that anyone can install that will be around $75.
When this mod is installed, the write protect of the drive can then be controlled by the user at all times.
Hitachi 0500 DLN10N
NO INFO
There is no info of any work or progress made with this drive yet.
BenQ 0800 VAD6038
v2.0 COMPLETED (NOT YET RELEASED)
Rips full ISO, including correct AP2.5 data. Not released yet. Waiting on supporting software to be completed.
Lite-On 0800 DG-16D2S
v2.0 IN PROGRESS
Rips full ISO, including correct AP2.5 data.
