Liteon DG16D2S No drive detected..HJÄLP!
Tjenare, jag har trubbel!
ska flasha liteon, en som lasern pajade sig på för att jag inte tog bort kabeln till den. Jag har bytt den, och nu när jag startar den med ck3i , usb pro etc. Så hittar den läsaren i JF och lasern funkar perfekt, jag väljer rätt rätt firmware som source och target, kör liteon erase, allt går bra. Sen ska jag göra outro/ata reset för att få den ur vendor mode och då står den där i typ 20min utan att något händer. Jag trycker då på write för att se om den vill skriva om läsarn, då står det "error nånting" sen ska jag starta den igen, då står det no drive detected. Vettefan vad jag ska göra...'
Brickad ???
LOG
Kod:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.89 Beta (284)
Session Started Thu Nov 24 20:22:26 2011
This is a Wow 64 process running on 4 x 64 bit CPUs
portio64.sys Driver Installed
portio64.sys Driver Started, thanks Schtrom !
Found 10 I/O Ports.
Found 2 Com Ports.
Found 6 windows drives A: C: D: E: F: G:
Found 2 CD/DVD drives E: G:
XECUTER X360USB PRO attached.
Drive is Lite-On..
Lite-On-Erase NOT sent
Loading firmware file C:\Users\Marcus\Desktop\All in one\Xbox 360\Backups\Robin K-Ab assistans\lt 2.0\Dummy.bin
MD5 hash: 89b41dae282dc5b0a85313802a50ccab
Inquiry string found
Identify string found
Parse Failed !
Loading firmware file C:\Users\Marcus\Desktop\All in one\Xbox 360\Backups\Robin K-Ab assistans\lt 2.0\Dummy.bin
MD5 hash: 89b41dae282dc5b0a85313802a50ccab
Inquiry string found
Identify string found
Drive key @ 0xA030 C968C548AE772BF7AF02EF6993930BEC
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: PhatKey Extract
Auto-Loading firmware file C:\Users\Marcus\Desktop\All in one\Xbox 360\JungleFlasher v0.1.89 Beta (284)\firmware\LTPlus-025-v2.0.bin
MD5 hash: 0264149996f783b54629c1598072e50e
Genuine LT plus v2.0
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: LT-Plus 2.0
Spoofing Target
DVD Key copied to target
Target is LT - ID strings not copied to Target
Serial data already matches
Target rev is LT 02510C, serial info not copied
Spoofing Target
DVD Key already matches
Target is LT - ID strings not copied to Target
Serial data already matches
Target rev is LT 02510C, serial info not copied
Sending Lite-On-Erase request to port 0x0000
..
Drive returned Status 0x90
....................
Device Intro failed!
Sending Lite-On-Erase request to port 0x0000
..
Drive returned Status 0x90
...............
Device Intro failed!
Sending Lite-On-Erase request to port 0x0000
..
Drive returned Status 0x80
........
Serial flash found with Status 0x72
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes
Getting Status from port 0x0000
SPi flash found with Status 0x72
Sending Chip Erase to Port 0x0000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write verified OK !
Sending Vendor Outro to port 0x0000
Drive is Lite-On..
Sending Vendor Outro to port 0x0000
Drive is Lite-On..
Getting Status from port 0x0000
Invalid Status 0x50
Sending Lite-On-Erase request to port 0x0000
..
Drive returned Status 0x90
....................
Device Intro failed!
Sending Lite-On-Erase request to port 0x0000
..............
Drive returned Status 0x72
Manufacturer ID: 0x0
Device ID: 0x0
Flash Name: Unknown type
Flash Size: n/a
Sending Vendor Outro to port 0x0000
Sending Vendor Outro to port 0x0000
