Xbit utan "extradelen ( usb connectorn) "

[svan]

Tjenna...
En polare till mig råkade paja sin "usb-del" till sitt xbit funkar chippet utan den ?. Då han gjorde detta innan han satte i chippet så vet han ej.. då han inte kan få det att starta nu.

Eller vet någon vart man kan få tag på en ny ?

[Hansi]

Har han köpt det av mig så kan jag skicka en ny utan kostnad. Annars 200:- + 49:- frakt.

[svan]

Aha , nä han har ju inte det , men kan säga till han att det går att beställa av er

Tack för det snabba svaret

[EvilBoY]

det ska funka utan, man måste flasha nån special edition bios bara har jag för mig....

[Hansi]

Chippet har nog rätt svårt veta vilken bank som skall startas om inte USB modulen sitter på...och det är ännu svårare att flasha in det där specialbioset som jag aldrig hört talas om förut...

[svan]

jag säger till han att köpa en sån usb-connector istället , då jag personligen inte tror på SPECIAL biosen iheler

[EvilBoY]

I have my external piece outside, but here is a trick for those who have their piece placed inside:
http://forums.xbox-scene.com/index.php?showtopic=222577
måste varit detta jag läste förut, glöm det jag sa med special bios, jag sa heller inte att jag var säker, aja

Don't need to flash a bios and never touch the dip switches? You can get rid of the external chip and the wires completely.
If you take out the external chip and the wires, X-B.I.T assumes that you have all the dip switches on off position, in other words, bios bank 1 selected and stealth mode off. Therefore, all you need to do is to put your bios on bank 1 and X-B.I.T works nicely without the external piece. Note that the size of bios bank 1 is 2M on format 1, 1M on formats 2-5 and 512k on format 6, so you may need to enlarge your bios image so that it fits into the bank 1. Xecuter2 bios release comes with a simple bat-file which copies the standard bios image to 512k or 1M size, but you can also use XBTool to resize your bios image. To temporarely disable the chip (when playing on Live), you need to add "stealth mode via power button" wire (which can be installed without soldering Xbox btw) or then you have to add a custom switch directly to X-B.I.T (send PM, if you are unsure how to do that).

The trick has been tested with X2 4983.06 bios.

tadaaa

[svan]

I have my external piece outside, but here is a trick for those who have their piece placed inside:
http://forums.xbox-scene.com/index.php?showtopic=222577
måste varit detta jag läste förut, glöm det jag sa med special bios, jag sa heller inte att jag var säker, aja

Don't need to flash a bios and never touch the dip switches? You can get rid of the external chip and the wires completely.
If you take out the external chip and the wires, X-B.I.T assumes that you have all the dip switches on off position, in other words, bios bank 1 selected and stealth mode off. Therefore, all you need to do is to put your bios on bank 1 and X-B.I.T works nicely without the external piece. Note that the size of bios bank 1 is 2M on format 1, 1M on formats 2-5 and 512k on format 6, so you may need to enlarge your bios image so that it fits into the bank 1. Xecuter2 bios release comes with a simple bat-file which copies the standard bios image to 512k or 1M size, but you can also use XBTool to resize your bios image. To temporarely disable the chip (when playing on Live), you need to add "stealth mode via power button" wire (which can be installed without soldering Xbox btw) or then you have to add a custom switch directly to X-B.I.T (send PM, if you are unsure how to do that).

The trick has been tested with X2 4983.06 bios.

tadaaa

Måste säga att jag ska hem och testa, beställer dock en usb-connector men det är ju kul om det funkar