Programvara till Viperchippet (Cobra v1.2 DIREKT BOOT UTAN SWAP + MULTI DISC SUPPORT)

[Hansi]

Här är lite användbara verktyg för viperchippet.

[Hansi]

************

Alla COBRA filer är borttagna från forumet då det från och med 2005-07-01 är olagligt att kringgå tekniska åtgärder som är avsedda att upprätthålla intellektuella rättigheter

*************



° ° °
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ±² ÄÄÄÄÄÄ ±² ÄÄÄÄÄÄÄÄÄÄ ±² ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³X °ÛßÜÜ °Ûßß ÜÛßß ²Ûß ßßÜ ²Û °ÜßÛ °Ü Û ²ÛßÛ °Ûßß X³
³ ÛÛ Û Û ÛÛß ÛÛ Û ÛÛ ²ÛßÛ ÛÛ ÛÛ Ü ÛÛ Û ÛÛ Û ÛÛß ³
³ ° ± ² Û ²Û ² Û ßÛ²Û ÛÛ ² ßÛ²± ßÛÛ² ßÛÜ ßÛ²Û ßÛ²Û ÛÛ²ß ßÛ²Û Û ² ± ° ³
ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´
³ ³
³ ³
³ - COBRA FOR VIPER GC V1.0 - ³
³ ³
³ 1st of april, 2005 ³
³ ³
³ ³
³ So, you were wondering what was the surprise in Cobra 1.0 ? Well... ³
³ We are proud to give you the very first Gamecube BIOS that works ³
³ Without swap. Seems that the Viper GC was unwittingly 2nd Generation ³
³ from the very beginning, since we made nice use of the lid switch ³
³ sensor cable designed by the Viper Team. Thanks guys you made it easy ³
³ with your foresight, for us to make the Cobra BIOS swapless. Don't ³
³ mess with the disc & lid anymore. Turn on your console and play. ³
³ ³
³ FEATURES ³
³ ³
³ - Direct boot of all media, without swapping! ³
³ - Automatic Media Detection: Insert disc, turn on GC and play! ³
³ - Supports all regions PAL / USA / JAP ³
³ - Play originals or backups from any region, thanks to the built-in ³
³ region-free feature ³
³ - Idle-bug free (no more Disc Read Errors when the drive is resting :-) ³
³ - Unique MultiBoot feature: put several games on one single disc! ³
³ - Disc Explorer to browse the content of original GC discs or DVDs and ³
³ that allows you: ³
³ - To flash your Viper GC by burning the flash file on a DVD ³
³ - To execute homebrew programs (.DOL) from DVD, and enjoy many ³
³ already-released homebrew productions! ³
³ - To flash your Viper GC by burning the flash file on a DVD ³
³ - To run the game you want from a MultiBoot compilation ³
³ - To load cheat codes from disc into Viper GC Memory ³
³ - Powerful Cheat Code System compatible with Action Replay codes, ³
³ codes are stored in the Viper GC Flash so no memory card is needed! ³
³ - Cheat codes can be either entered using Cobra Menus or loaded from ³
³ a file using the Disc Explorer ³
³ - BIOS Configuration stored into the Viper GC Flash ³
³ - Selectable default boot action (Main menu, Boot disc, Original BIOS, ³
³ Disc Explorer) and special boot action (when the X key is held) ³
³ - Calls Original BIOS Game Loader for 100% compatibility ³
³ - Supports all hardware revisions (including DOL-101 units) ³
³ - User-Friendly GUI ³
³ ³
³ So what do you need exactly ? ³
³ - A Viper GC chip ³
³ - This very flash file ³
³ - Some Compatible Media and a DVD-burner ³
³ ³
³ ³
³ WHAT'S NEW ? ³
³ ³
³ Well, as you can see from the feature list, there are a lot of new ³
³ features we introduced in this release. ³
³ - Direct boot of all media, without swapping ! ³
³ - Fixed compatibility problem with DOL-101 units ³
³ - Automatic Media Detection: Insert disc, turn on GC and play! ³
³ - Fixed Idle bug, you won't have any DRE if the drive is resting :-) ³
³ - Powerful Cheat Code System compatible with Action Replay codes, ³
³ codes are stored in the Viper GC Flash so no memory card is needed! ³
³ - Cheat codes can be either entered using Cobra Menus or loaded from ³
³ a file using the Disc Explorer ³
³ - Unique MultiBoot feature: put several games on one single disc! ³
³ - A lot of fixes and low-level changes ³
³ ³
³ A Swap disc option was left in (called "Change Disc" as you could also ³
³ replace a backup with another backup) to be totally backward ³
³ compatible. Read more below ³
³ ³
³ ³
³ USER MANUAL ³
³ ³
³ - If you want to use full-size DVD-R you can remove the top of the ³
³ console. Team Xtender will be releasing replacement lids compatible ³
³ with full DVD-R within two week. Best of all, we learned this week ³
³ that they will be officially Viper GC branded! ³
³ ³
³ - Flash the Viper GC with this BIOS then remove the parallel port ³
³ connector from the programmer. If you prefear you can flash this ³
³ BIOS from DVD if you have Cobra 0.3+ already running on your chip. ³
³ We've heard Viper Team will release an USB programmer for the chip ³
³ soon if you prefear USB. ³
³ ³
³ - Turn on your GC with the disc you want to run. It can be an ³
³ original or a backup, but if it's a backup it should be filled with ³
³ 1.3GB of data at least (for now). If you have a black screen coming, ³
³ it's probably beause your Viper installation is not clean. ³
³ ³
³ - While turning on your GC: ³
³ - Hold Y to go to Main Menu (if it's not your Default Boot mode) ³
³ - Hold X for the other boot mode (can be set in Config Menu) ³
³ - Don't hold anything for Default Boot Action ³
³ ³
³ - Select "Direct Disc Boot" if you want to play a backup or homebrew ³
³ program from DVD. If you have problems using the Direct Disc Boot ³
³ method with your media, you can still use the Swap trick. ³
³ ³
³ - If you want to use the old Swap Trick Method (for discs that are ³
³ not full or that have problems to sync with the Direct Disc Boot) ³
³ boot your GC with an original disc. Then choose the "Change Disc" ³
³ option and follow the instructions. After the swap is done, you ³
³ can select Direct Disc Boot option again. ³
³ ³
³ - Select "Original BIOS" if you want to play an original Game ³
³ compatible with your GC region, or if you want to go into the ³
³ Original BIOS menus. ³
³ ³
³ - Select "Configuration Menu" if you want to change your Cobra BIOS ³
³ configuration. The options are quite self-explanatory. ³
³ ³
³ - Select "Disc Explorer" to enter to browse the content or your ³
³ original GC discs or DVDs. Supported file systems are FST ³
³ (GC File System) and ISO9660. Joliet encoding is not supported in ³
³ ISO mode. ³
³ ³
³ - Enter "Cheat codes" to select, enable, disable and edit cheat codes ³
³ ³
³ - Enter "Disc Explorer" to select a game from a MultiBoot disc ³
³ ³
³ - Enter "Disc Explorer" and select a .VGC file if you want to reflash ³
³ your Viper GC without the need of the Parallel port programmer! ³
³ ³
³ - Enter "Disc Explorer" and select a .DOL file if you want to run ³
³ a homebrew program! (You can put up to 1.4 GB of homebrew things on ³
³ a disc. We hope this will give some inspiration to emu authors :-) ³
³ Our DOL loader is not perfect for now and works for around half of ³
³ the public homebrew programs. Here are some of the programs booting ³
³ successfully: ³
³ GC-Linux, Ascii Fighter, DVD Browser, CTR_GCS, CTR_SND, GBQ Gameboy ³
³ emulator, PSOLoader "It's working" demo, Maze, Nitrorally, Yeti 3D ³
³ 3D engine, Chip8 emulator, Snowlords game, Terranigma, XRick and ³
³ probably many we missed! ³
³ ³
³ - Enter "Disc Explorer" and select a .VGC file if you want to reflash ³
³ your Viper GC without the need of the Parallel port programmer! ³
³ ³
³ - Enter "Disc Explorer" and select a .COD file if you want to add ³
³ cheat codes for a game without the need to enter it using the pad! ³
³ ³
³ - Make sure that the "lid passthru" wires of the Viper GC are ³
³ installed correctly or the disc won't spin.
³ ³
³ ³
³ DIRECT BOOT LIMITATIONS ³
³ ³
³ THE MEDIA ³
³ ³
³ The GC drive in its default state only eats high-quality DVD-R and ³
³ a few MINI-DVD-R. But a couple of weeks ago, speedi from the afterdawn ³
³ forums found a nice way to tweak the laser so it reads almost any burned³
³ media including some DVD+Rs. We recommend doing this laser tweak if you ³
³ have any problems reading your DVDs. We are no laser experts, in fact ³
³ we think it would be more appropriate to just lower the value of the ³
³ variable resistor instead of setting it to an absoulte given value, ³
³ but lots of people including us have been using this laser tweek for a ³
³ couple of weeks without any problem reported so far. ³
³ ³
³ You don't need to encrypt the disc or use a special burner firmware ³
³ to write the disc. Just burn your ISO/GCM (rename it to .ISO) with ³
³ Nero (or any other tool). ³
³ ³
³ ³
³ CHEAT CODES ³
³ ³
³ If you want to use cheat codes, enter Cheat Codes menu,select a game, ³
³ check the codes you want to use, exit the cheat selector and enable ³
³ cheats. ³
³ ³
³ To add new codes follow on-screen instructions. The codes are ³
³ compatible with decrypted AR codes. You can decrypt AR codes using ³
³ the great GCNCrypt by Parayste. Never enter the first code of a given ³
³ cheat code (validator code). You can also put .COD files on a DVD and ³
³ load cheat codes from there, each file corresponds to one game. ³
³ ³
³ For now we've reserved 4kb in Viper GC Flash memory to store cheat ³
³ codes. If that's not enough we'll add some more space in next release. ³
³ ³
³ ³
³ TROOBLESHOOTING ³
³ ³
³ - If the disc stops spinning in the menu it means that the drive can't ³
³ sync with your media, or that there are not enough data on your disc. ³
³ In direct boot mode the GC is very selective about the media it ³
³ takes. If you have any problem please try the swap trick. If you ³
³ still have problems try with different media/burner. Make sure your ³
³ laser is correctly tweaked! ³
³ ³
³ - Audio Streaming: Some games use a special audio streaming mode ³
³ that can be compared to CDDA. For now, the ISO of the file needs to ³
³ be patched with 0rbital's great ViperTemporaryAudioFix 1.1+. If the ³
³ ISO is not patched you'll have noise instead of music. We will try to ³
³ fix this issue so no patching is required. But in case we do, YOUR ³
³ PATCHED ISOS WILL BE FULLY COMPATIBLE and still work with music! ³
³ (so forget what is written in the fixer nfo file). Don't run the fix ³
³ on ISOs that don't need fixing as it will only destroy them :-) ³
³ ³
³ - Most multi-discs games are working, just play with Disc 1 until ³
³ you're asked to change disc and make a save here. Then boot with ³
³ Disc 2 instead. We started working on code to allow disc-change, ³
³ and we'll integrate it in a new release. ³
³ ³
³ All those problems could be fixed in a next update. ³
³ ³
³ Before burning an image, makes sure it is 1459978240 bytes long else ³
³ you may need to use the swap trick method. ³
³ ³
³ To know what's your GC Version code (2 digit number) go into Config ³
³ Menu, then Version Info, 2nd page. First digit corresponds to GC ³
³ mobo version, 2nd digit corresponds to drive version. ³
³ ³
³ IF YOU MAKE BACKUPS, DON'T USE ANY "WIPE" TOOLS TO SAVE SPACE. Unless ³
³ you know it's REALLY working. Most of thoses tools only work because ³
³ the current pso loaders patch libraries routines to emulate DVD. But ³
³ on REAL HARDWARE, each file/fst has to be aligned on a 4-byte boundary! ³
³ Else nothing will work. Audio Files (for audio streaming) even need ³
³ to be aligned on a 32kb-boundary ! So forget current "WIPE" tools until ³
³ they are fixed. But note that Garbage is NOT NEEDED by the GC. The ³
³ files must be correctly aligned that's it. So if your "WIPE" tool is ³
³ not changing the image size (meaning there's no relocation) then it's ³
³ probably fine. Use FSTFIX by LOONYCUBE to fix bad rips. ³
³ ³
³ ³
³ TECHNICAL INFO ³
³ ³
³ We'll release a command-line MultiBoot Disc maker next week if nobody ³
³ releases a better one before we do :-) Here are the specs for Multiboot ³
³ discs. Note that every image should be aligned on a 32kb boundary. ³
³ At offset 0x00: 43 4F 42 52-41 4D 42 31 ³
³ 0x40: Position of the 1st image in bytes (Big endian) ³
³ 0x44: Position of the 2nd image in bytes (Big endian) ³
³ ....: ...etc... ³
³ ....: 00 00 00 00 ³
³ ³
³ The MultiBoot feature is stealth for the GC so it's 100% compatible ³
³ with homebrew images. If you want to put several backups on one disc ³
³ you'll have to remove the garbage at first. ³
³ The maximum size of a MultiBoot disc is 1459978240 bytes. ³
³ ³
³ ³
³ THE RUMORS & EVENTS ³
³ ³
³ Lately there has been a few events we'd like to comment. First, ³
³ congratulation to Utopia for the deobfuscation work you did and the ³
³ release of Anaconda. We like your style :-) Except maybe for the ³
³ "Mentalcube [...] did a well job while choosing the neccessary patches" ³
³ we find that "choosing" is not exactly the right term, as this patch ³
³ is the results of tousands of lines of firmware code and several months ³
³ of hacking and debugging. And thanks for the obfuscation tips :-) ³
³ Anaconda led to a lot of stuff from the best (GCOS) to the worst ³
³ (people selling our code without authorisation). Anaconda code is ³
³ a 1:1 rip of our code, except for the loading part running on the GC ³
³ CPU that was rewritten by Utopia (they made it clear but some people ³
³ just didn't get it). ³
³ ³
³ Now about GCOS. We like what you're doing, even if up until now you're ³
³ using our code without authorisation. But we're releasing Cobra 0.4 ³
³ drivecodes under GPL license so it matches the license of other files ³
³ you're using. Feel free to use, abuse it and improve it! ;-) ³
³ Cobra 1.0 drivecode might follow in the future, but for now we chose ³
³ closed source. ³
³ ³
³ It appears that one of our beta-testers leaked a beta of Cobra 1.0 one ³
³ month ago. We'll do all beta testing by ourselves now. We find it's an ³
³ amazing coincidence that a swapless chip was announced two weeks after ³
³ the leak. Please don't support thieves. ³
³ ³
³ Oh and about Idle-bug, it was a BUG, yes a BUG of our old cobra ³
³ code in the way we were handling a protection. The bug is now fixed ³
³ and now the laser won't go out of the data area anymore, causing idle ³
³ DREs when it couldn't focus. ³
³ ³
³ ³
³ THE FUTURE ³
³ ³
³ There's MUCH more to come, you'll see soon :-) ³
³ And our low-level hackers are currently working on the disc calibration ³
³ code to improve Direct Boot Media compatibility. We'll mess with that ³
³ only when we are certain that the code won't hurt your console! ³
³ ³
³ ³
³ CLOSING WORDS ³
³ ³
³ Special thanks to E*Flash for his help, RoM for the early units, ³
³ Melan for the /48 GC and to everybody that tried Cobra V0.4, posted ³
³ constructive feedback. Thanks a lot for your patience. You'll never ³
³ wait that long anymore for future release, this was a very special ³
³ milestone :-) ³
³ ³
³ You are free to redistribute this package as long as it's not changed, ³
³ patched, ported, or whatever. ³
³ ³
³ Our code is free of any copyrighted code from third party. ³
³ It is also free of any GPL licensed code, we have strong respect for ³
³ other people's hard work. We only ask you to show similar respect ³
³ toward our work. To put it in other words, if you are in the "right" ³
³ side, draw the line between learning and stealing. Thank you. ³
³ ³
³ Enjoy! ³
³ ³
³ ° ° ° ³
ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ±² ÄÄÄÄÄÄ ±² ÄÄÄÄÄÄÄÄÄÄ ±² ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´
³ °ÛßÜÜ °Ûßß ÜÛßß ²Ûß ßßÜ ²Û °ÜßÛ °Ü Û ²ÛßÛ °Ûßß ³
³ ÛÛ Û Û ÛÛß ÛÛ Û ÛÛ ²ÛßÛ ÛÛ ÛÛ Ü ÛÛ Û ÛÛ Û ÛÛß ³
³X ° ± ² Û ²Û ² Û ßÛ²Û ÛÛ ² ßÛ²± ßÛÛ² ßÛÜ ßÛ²Û ßÛ²Û ÛÛ²ß ßÛ²Û Û ² ± ° X³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

[Hansi]

************

Alla COBRA filer är borttagna från forumet då det från och med 2005-07-01 är olagligt att kringgå tekniska åtgärder som är avsedda att upprätthålla intellektuella rättigheter

*************




° ° °
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ±² ÄÄÄÄÄÄ ±² ÄÄÄÄÄÄÄÄÄÄ ±² ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³X °ÛßÜÜ °Ûßß ÜÛßß ²Ûß ßßÜ ²Û °ÜßÛ °Ü Û ²ÛßÛ °Ûßß X³
³ ÛÛ Û Û ÛÛß ÛÛ Û ÛÛ ²ÛßÛ ÛÛ ÛÛ Ü ÛÛ Û ÛÛ Û ÛÛß ³
³ ° ± ² Û ²Û ² Û ßÛ²Û ÛÛ ² ßÛ²± ßÛÛ² ßÛÜ ßÛ²Û ßÛ²Û ÛÛ²ß ßÛ²Û Û ² ± ° ³
ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´
³ ³
³ ³
³ - COBRA FOR VIPER GC V1.1 - ³
³ ³
³ 14th of april, 2005 ³
³ ³
³ ³
³ WHAT'S NEW ? ³
³ ³
³ - Built-in Audio Fix, that could be Enabled/Disabled in the Config ³
³ Menu for full backward compatibility with your old backups. ³
³ - Music Player in Disc Explorer! Select an audio file to play it. For ³
³ now only ADPCM audio streams are supported (*.ADP, *.PCM, *stream*, ³
³ etc.), the GC streaming format. Support for more formats, including ³
³ MP3, is coming in a next release. ³
³ - Optimal DRE Handling, read more below. ³
³ - Improved Direct Boot mode Compatibility, now it should be compatible ³
³ with every good media, including DVD+R. ³
³ - No need to enter Disc Explorer anymore to boot MultiBoot discs, just ³
³ select Direct Boot Disc and the Cobra BIOS will detect automatically ³
³ if you inserted a GC Original, DVD-R, DVD+R or MultiBoot Disc ! ³
³ - Fixed a MultiBoot compatibility problem. Now it should work properly ³
³ with every images. ³
³ - Upgrade with the Disc Explorer from Cobra 1.0 if you want to keep ³
³ your AR codes and configuration intact. ³
³ - And some more bugfixes/changes ³
³ ³
³ About Disc Read Error handling, we can't help you if you use a bad ³
³ burner, media or if your laser is not tweaked correctly. But we've ³
³ improved the error handling code A LOT. Here is a small experiment ³
³ we don't recommend trying at home, except if you know what youre doing: ³
³ You can remove the spinning disc for one second while it's playing a ³
³ movie or loading data. This will trigger some serious read error with ³
³ any other BIOS :-) Now put the disc back in quickly and it will ³
³ continue loading, without a crash! ³
³ ³
³ ³
³ FEATURES ³
³ ³
³ - Direct boot of all media, without swapping! ³
³ - Automatic Media Detection: Insert disc, turn on GC and play! ³
³ - Supports all regions PAL / USA / JAP ³
³ - Play originals or backups from any region, thanks to the built-in ³
³ region-free feature ³
³ - Built-in Audio Fix, that could be Enabled/Disabled in the Config ³
³ Menu for full backward compatibility with your old backups. ³
³ - Idle-bug free (no more Disc Read Errors when the drive is resting :-) ³
³ - Unique MultiBoot feature: put several games on one single disc! ³
³ - Disc Explorer to browse the content of original GC discs or DVDs and ³
³ that allows you: ³
³ - To flash your Viper GC by burning the flash file on a DVD ³
³ - To execute homebrew programs (.DOL) from DVD, and enjoy many ³
³ already-released homebrew productions! ³
³ - To play music, for now only ADPCM files aligned on a 32kb ³
³ boundary are accepted. This is the format of all GC games that ³
³ are using audio streaming, so listen to those games songs! ³
³ - To run the game you want from a MultiBoot compilation ³
³ - To load cheat codes from disc into Viper GC Memory ³
³ - Powerful Cheat Code System compatible with Action Replay codes, ³
³ codes are stored in the Viper GC Flash so no memory card is needed! ³
³ - Cheat codes can be either entered using Cobra Menus or loaded from ³
³ a file using the Disc Explorer ³
³ - BIOS Configuration stored into the Viper GC Flash ³
³ - Selectable default boot action (Main menu, Boot disc, Original BIOS, ³
³ Disc Explorer) and special boot action (when the X key is held) ³
³ - Calls Original BIOS Game Loader for 100% compatibility ³
³ - Supports all hardware revisions (including DOL-101 units) ³
³ - User-Friendly GUI ³
³ ³
³ A Swap disc option was left in (called "Change Disc" as you could also ³
³ replace a backup with another backup) to be totally backward ³
³ compatible. Read more below ³
³ ³
³ So what do you need exactly ? ³
³ - A Viper GC chip ³
³ - This very flash file ³
³ - Some Compatible Media and a DVD-burner ³
³ ³
³ ³
³ USER MANUAL ³
³ ³
³ - If you want to use full-size DVD-R you can remove the top of the ³
³ console. Team Xtender will be releasing replacement lids compatible ³
³ with full DVD-R within two week. Best of all, we learned this week ³
³ that they will be officially Viper GC branded! ³
³ ³
³ - Flash the Viper GC with this BIOS then remove the parallel port ³
³ connector from the programmer. If you prefear you can flash this ³
³ BIOS from DVD if you have Cobra 0.3+ already running on your chip. ³
³ We've heard Viper Team will release an USB programmer for the chip ³
³ soon if you prefear USB. ³
³ ³
³ - Turn on your GC with the disc you want to run. It can be an ³
³ original or a backup, but if it's a backup it should be filled with ³
³ 1.3GB of data at least (for now). If you have a black screen coming, ³
³ it's probably beause your Viper installation is not clean. ³
³ ³
³ - While turning on your GC: ³
³ - Hold Y to go to Main Menu (if it's not your Default Boot mode) ³
³ - Hold X for the other boot mode (can be set in Config Menu) ³
³ - Don't hold anything for Default Boot Action ³
³ ³
³ - Select "Direct Disc Boot" if you want to play a backup or homebrew ³
³ program from DVD. If you have problems using the Direct Disc Boot ³
³ method with your media, you can still use the Swap trick. ³
³ ³
³ - If you want to use the old Swap Trick Method (for discs that are ³
³ not full or that have problems to sync with the Direct Disc Boot) ³
³ boot your GC with an original disc. Then choose the "Change Disc" ³
³ option and follow the instructions. After the swap is done, you ³
³ can select Direct Disc Boot option again. ³
³ ³
³ - Select "Original BIOS" if you want to play an original Game ³
³ compatible with your GC region, or if you want to go into the ³
³ Original BIOS menus. ³
³ ³
³ - Select "Configuration Menu" if you want to change your Cobra BIOS ³
³ configuration. The options are quite self-explanatory. ³
³ ³
³ - Select "Disc Explorer" to enter to browse the content or your ³
³ original GC discs or DVDs. Supported file systems are FST ³
³ (GC File System) and ISO9660. Joliet encoding is not supported in ³
³ ISO mode. ³
³ ³
³ - Enter "Cheat codes" to select, enable, disable and edit cheat codes ³
³ ³
³ - Enter "Disc Explorer" and select a .VGC file if you want to reflash ³
³ your Viper GC without the need of the Parallel port programmer! ³
³ ³
³ - Enter "Disc Explorer" and select a .DOL file if you want to run ³
³ a homebrew program! (You can put up to 1.4 GB of homebrew things on ³
³ a disc. We hope this will give some inspiration to emu authors :-) ³
³ Our DOL loader is not perfect for now and works for around half of ³
³ the public homebrew programs. Here are some of the programs booting ³
³ successfully: ³
³ GC-Linux, Ascii Fighter, DVD Browser, CTR_GCS, CTR_SND, GBQ Gameboy ³
³ emulator, PSOLoader "It's working" demo, Maze, Nitrorally, Yeti 3D ³
³ 3D engine, Chip8 emulator, Snowlords game, Terranigma, XRick and ³
³ probably many we missed! ³
³ ³
³ - Enter "Disc Explorer" and select a .VGC file if you want to reflash ³
³ your Viper GC without the need of the Parallel port programmer! ³
³ ³
³ - Enter "Disc Explorer" and select a .COD file if you want to add ³
³ cheat codes for a game without the need to enter it using the pad! ³
³ ³
³ - Make sure that the "lid passthru" wires of the Viper GC are ³
³ installed correctly or the disc won't spin. ³
³ ³
³ ³
³ DIRECT BOOT LIMITATIONS ³
³ ³
³ THE MEDIA ³
³ ³
³ The GC drive in its default state only eats high-quality DVD-R and ³
³ a few MINI-DVD-R. But a couple of weeks ago, speedi from the afterdawn ³
³ forums found a nice way to tweak the laser so it reads almost any burned³
³ media including some DVD+Rs. We recommend doing this laser tweak if you ³
³ have any problems reading your DVDs. We are no laser experts, in fact ³
³ we think it would be more appropriate to just lower the value of the ³
³ variable resistor instead of setting it to an absoulte given value, ³
³ but lots of people including us have been using this laser tweek for a ³
³ couple of weeks without any problem reported so far. For more info on ³
³ laser tweaking please read this forum post: ³
³ http://forums.afterdawn.com/thread_view.cfm/138930 ³
³ ³
³ You don't need to encrypt the disc or use a special burner firmware ³
³ to write the disc. Just burn your ISO/GCM (rename it to .ISO) with ³
³ Nero (or any other tool). ³
³ ³
³ ³
³ CHEAT CODES ³
³ ³
³ If you want to use cheat codes, enter Cheat Codes menu,select a game, ³
³ check the codes you want to use, exit the cheat selector and enable ³
³ cheats. ³
³ ³
³ To add new codes follow on-screen instructions. The codes are ³
³ compatible with decrypted AR codes. You can decrypt AR codes using ³
³ the great GCNCrypt by Parayste. Never enter the first code of a given ³
³ cheat code (validator code). You can also put .COD files on a DVD and ³
³ load cheat codes from there, each file corresponds to one game. ³
³ ³
³ Cheat codes are working for backups and original games. ³
³ ³
³ For now we've reserved 4kb in Viper GC Flash memory to store cheat ³
³ codes, that should be enough to store a few hundred of codes. ³
³ ³
³ ³
³ TROOBLESHOOTING ³
³ ³
³ - If the disc stops spinning in the menu it means that the drive can't ³
³ sync with your media, or that there are not enough data on your disc. ³
³ In direct boot mode the GC is very selective about the media it ³
³ takes. If you have any problem please try the swap trick. If you ³
³ still have problems try with different media/burner. Make sure your ³
³ laser is correctly tweaked! We strongly recommend NEC burners, they ³
³ produce really good discs that won't give you any DRE. ³
³ ³
³ - Audio Streaming: Some games use a special audio streaming mode ³
³ that can be compared to CDDA. For now, the ISO of the file needs to ³
³ be patched with 0rbital's great ViperTemporaryAudioFix 1.1+. If the ³
³ ISO is not patched you'll have noise instead of music. We will try to ³
³ fix this issue so no patching is required. But in case we do, YOUR ³
³ PATCHED ISOS WILL BE FULLY COMPATIBLE and still work with music! ³
³ (so forget what is written in the fixer nfo file). Don't run the fix ³
³ on ISOs that don't need fixing as it will only destroy them :-) ³
³ ³
³ - Most multi-discs games are working, just play with Disc 1 until ³
³ you're asked to change disc and make a save here. Then boot with ³
³ Disc 2 instead. We started working on code to allow disc-change, ³
³ and we'll integrate it in a new release. ³
³ ³
³ All those problems could be fixed in a next update. ³
³ ³
³ Before burning an image, makes sure it is 1459978240 bytes long else ³
³ you may need to use the swap trick method. ³
³ ³
³ To know what's your GC Version code (2 digit number) go into Config ³
³ Menu, then Version Info, 2nd page. First digit corresponds to GC ³
³ mobo version, 2nd digit corresponds to drive version. ³
³ ³
³ IF YOU MAKE BACKUPS, DON'T USE ANY "WIPE" TOOLS TO SAVE SPACE. Unless ³
³ you know it's REALLY working. Most of thoses tools only work because ³
³ the current pso loaders patch libraries routines to emulate DVD. But ³
³ on REAL HARDWARE, each file/fst has to be aligned on a 4-byte boundary! ³
³ Else nothing will work. Audio Files (for audio streaming) even need ³
³ to be aligned on a 32kb-boundary ! So forget current "WIPE" tools until ³
³ they are fixed. But note that Garbage is NOT NEEDED by the GC. The ³
³ files must be correctly aligned that's it. So if your "WIPE" tool is ³
³ not changing the image size (meaning there's no relocation) then it's ³
³ probably fine. Use FSTFIX by LOONYCUBE to fix bad rips. ³
³ ³
³ ³
³ TECHNICAL INFO ³
³ ³
³ We'll release a command-line MultiBoot Disc maker next week if nobody ³
³ releases a better one before we do :-) Here are the specs for Multiboot ³
³ discs. Note that every image should be aligned on a 32kb boundary. ³
³ At offset 0x00: 43 4F 42 52-41 4D 42 31 ³
³ 0x40: Position of the 1st image in bytes (Big endian) ³
³ 0x44: Position of the 2nd image in bytes (Big endian) ³
³ ....: ...etc... ³
³ ....: 00 00 00 00 ³
³ ³
³ The MultiBoot feature is stealth for the GC so it's 100% compatible ³
³ with homebrew images. If you want to put several backups on one disc ³
³ you'll have to remove the garbage at first. ³
³ The maximum size of a MultiBoot disc is 1459978240 bytes. ³
³ ³
³ You can use Viper_Multi_Boot_ISO_Creator by LoonyCube to create ³
³ MultiBoot discs easily. ³
³ ³
³ ³
³ THE FUTURE ³
³ ³
³ Much more to come :-) ³
³ ³
³ ³
³ CLOSING WORDS ³
³ ³
³ Special thanks to E*Flash for his help, RoM for the early units, ³
³ Melan for the /48 GC and to everybody that tried Cobra V1.0 and posted ³
³ constructive feedback. ³
³ ³
³ You are free to redistribute this package as long as it's not changed, ³
³ patched, ported, or whatever. ³
³ ³
³ Our code is free of any copyrighted code from third party. ³
³ It is also free of any GPL licensed code, we have strong respect for ³
³ other people's hard work. We only ask you to show similar respect ³
³ toward our work. To put it in other words, if you are in the "right" ³
³ side, draw the line between learning and stealing. Thank you. ³
³ ³
³ Enjoy! ³
³ ³
³ ° ° ° ³
ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ±² ÄÄÄÄÄÄ ±² ÄÄÄÄÄÄÄÄÄÄ ±² ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´
³ °ÛßÜÜ °Ûßß ÜÛßß ²Ûß ßßÜ ²Û °ÜßÛ °Ü Û ²ÛßÛ °Ûßß ³
³ ÛÛ Û Û ÛÛß ÛÛ Û ÛÛ ²ÛßÛ ÛÛ ÛÛ Ü ÛÛ Û ÛÛ Û ÛÛß ³
³X ° ± ² Û ²Û ² Û ßÛ²Û ÛÛ ² ßÛ²± ßÛÛ² ßÛÜ ßÛ²Û ßÛ²Û ÛÛ²ß ßÛ²Û Û ² ± ° X³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

[Hansi]

************

Alla COBRA filer är borttagna från forumet då det från och med 2005-07-01 är olagligt att kringgå tekniska åtgärder som är avsedda att upprätthålla intellektuella rättigheter

*************



° ° °
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ±² ÄÄÄÄÄÄ ±² ÄÄÄÄÄÄÄÄÄÄ ±² ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³X °ÛßÜÜ °Ûßß ÜÛßß ²Ûß ßßÜ ²Û °ÜßÛ °Ü Û ²ÛßÛ °Ûßß X³
³ ÛÛ Û Û ÛÛß ÛÛ Û ÛÛ ²ÛßÛ ÛÛ ÛÛ Ü ÛÛ Û ÛÛ Û ÛÛß ³
³ ° ± ² Û ²Û ² Û ßÛ²Û ÛÛ ² ßÛ²± ßÛÛ² ßÛÜ ßÛ²Û ßÛ²Û ÛÛ²ß ßÛ²Û Û ² ± ° ³
ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´
³ ³
³ ³
³ - COBRA FOR VIPER GC V1.2 - ³
³ ³
³ 8th of may, 2005 ³
³ ³
³ ³
³ -[WHAT'S NEW ?]------------------------------------------------------- ³
³ ³
³ - Multi-disc games support ³
³ - Introducing Cobra Plug-in System: put a GC program (Game Ripper, ³
³ MP3 Player, Network loader, etc.) directly in Viper GC Memory! ³
³ - Full Panasonic Q support ³
³ - Supports disc changing from homebrew applications ³
³ - A lot of backend changes (the VGC is smaller now!) and some bugfixes. ³
³ ³
³ ³
³ -[FEATURES]----------------------------------------------------------- ³
³ ³
³ - Direct boot of all media, without swapping! ³
³ - Automatic Media Detection: Insert disc, turn on GC and play! ³
³ - Supports all regions PAL / USA / JAP ³
³ - Play originals or backups from any region, thanks to the built-in ³
³ region-free feature ³
³ - Built-in Audio Fix, that could be Enabled/Disabled in the Config ³
³ Menu for full backward compatibility with your old backups. ³
³ - Fully compatible with multi-disc games ³
³ - Unique MultiBoot feature: put several games on one single disc! ³
³ - Cobra Plug-in System: put your GC program (Game Ripper, MP3 Player, ³
³ Network loader, etc.) directly in Viper GC Memory! ³
³ - Disc Explorer to browse the content of original GC discs or DVDs and ³
³ that allows you: ³
³ - To flash your Viper GC by burning the flash file on a DVD ³
³ - To execute homebrew programs (.DOL) from DVD, and enjoy many ³
³ already-released homebrew productions! ³
³ - To play music (ADPCM files aligned on a 32kb boundary) ³
³ - To run the game you want from a MultiBoot compilation ³
³ - To load cheat codes from disc into Viper GC Memory ³
³ - To load a cobra plug-in from disc into Viper GC Memory ³
³ - Powerful Cheat Code System compatible with Action Replay codes, ³
³ codes are stored in the Viper GC Flash so no memory card is needed! ³
³ - Cheat codes can be either entered using Cobra Menus or loaded from ³
³ a file using the Disc Explorer ³
³ - BIOS Configuration stored into the Viper GC Flash ³
³ - Selectable default boot action (Main menu, Boot disc, Original BIOS, ³
³ Disc Explorer) and special boot action (when the X key is held) ³
³ - Calls Original BIOS Game Loader for 100% compatibility ³
³ - Supports all hardware revisions (including DOL-101 and Panasonic Q) ³
³ - Idle-bug free ³
³ - User-Friendly GUI ³
³ ³
³ A Swap disc option was left in (called "Change Disc" as you could also ³
³ replace a backup with another backup) to be totally backward compatible.³
³ ³
³ So what do you need exactly ? ³
³ - A Viper GC chip ³
³ - This very flash file ³
³ - Some Compatible Media and a DVD-burner ³
³ ³
³ ³
³ -[USER MANUAL]-------------------------------------------------------- ³
³ ³
³ - If you want to use full-size DVD-R you can remove the top of the ³
³ console. This week team Xtender should be releasing their officially ³
³ Viper GC branded replacement case that works with full-size DVD-R! ³
³ ³
³ - Flash the Viper GC with this BIOS then remove the parallel port ³
³ connector from the programmer. If you prefear you can flash this ³
³ BIOS from DVD if you have Cobra 0.3+ already running on your chip. ³
³ We've heard Viper Team will release an USB programmer for the chip ³
³ soon if you prefear USB. ³
³ ³
³ - Turn on your GC with the disc you want to run. It can be an ³
³ original or a backup. While turning on your GC : ³
³ - Hold Y to go to Main Menu (if it's not your Default Boot mode) ³
³ - Hold X for the other boot mode (can be set in Config Menu) ³
³ - Don't hold anything for Default Boot Action ³
³ ³
³ - If you want to use the old Swap Trick Method (for discs that are ³
³ not full or that have problems to sync with the Direct Disc Boot) ³
³ boot your GC with an original disc. Then choose the "Change Disc" ³
³ option and follow the instructions. After the swap is done, you ³
³ can select Direct Disc Boot option again. ³
³ ³
³ - Read more about the different menu options below. ³
³ ³
³ ³
³ -[THE MEDIA]---------------------------------------------------------- ³
³ ³
³ The GC drive in its default state only eats high-quality DVD-R and ³
³ a few MINI-DVD-R. By tweaking your laser it's possible to have your GC ³
³ read almost any media including DVD+R. For more info use google with ³
³ GC laser tweak keywords. ³
³ ³
³ ³
³ -[MAIN MENU]---------------------------------------------------------- ³
³ ³
³ DIRECT DISC BOOT : Play a backup or an original GC game from any ³
³ region. ³
³ ORIGINAL BIOS : Play an original game compatible with your GC ³
³ region or enter GC BIOS menus. ³
³ CONFIGURATION MENU: Change Cobra settings and view GC version info. ³
³ DISC EXPLORER : Browse the content of the disc and load files. ³
³ CHEAT CODES : Manage cheat codes ³
³ CHANGE DISC : Change the disc without having to reset the GC. ³
³ PLUG-IN : Execute the embedded Cobra Plug-in. Only available ³
³ if a plug-in is loaded. ³
³ ³
³ ³
³ -[DISC EXPLORER]------------------------------------------------------ ³
³ ³
³ The Disc Explorer lets you browse the content of the inserted disc. ³
³ The following file systems are supported: ISO9660 (Level2 compatible, ³
³ no joliet) and FST (GC native file system). ³
³ ³
³ The files with following extensions can be selected, loaded or ³
³ executed by pressing the A button: ³
³ ³
³ .VGC : Viper GC flash file. Select this file to reprogram your Viper GC ³
³ without the need of the Viper GC parallel port programmer. ³
³ .DOL : Homebrew application. Select this file to execute it. Examples ³
³ of homebrew applications are emulators, games, loaders, etc. ³
³ .COD : Cobra cheat code file. Select this file to add cheat codes for ³
³ a game without the need to enter it using the pad! ³
³ .CBP : Cobra plug-in. Select this file to load a plug-in into Viper GC ³
³ Memory. You can then execute it from the Cobra main menu. ³
³ Examples of plug-in are disc rippers, MP3 players, loaders, etc. ³
³ .PCM : ADPCM stream file (must be aligned on a 32kb boundary). ³
³ .ADP : ADPCM stream file (must be aligned on a 32kb boundary). ³
³ ³
³ The disc explorer can also play any audio file encodded with GC native ³
³ ADPCM format, regardless of its file extension. If you suspect a file ³
³ is an ADPCM audio file, simply select it and see if it plays! ³
³ ³
³ ³
³ -[CHEAT CODES]-------------------------------------------------------- ³
³ ³
³ If you want to use cheat codes, enter Cheat Codes menu,select a game, ³
³ check the codes you want to use, exit the cheat selector and enable ³
³ cheats. ³
³ ³
³ To add new codes follow on-screen instructions. The codes are ³
³ compatible with decrypted AR codes. You can decrypt AR codes using ³
³ the great GCNCrypt by Parayste. Never enter the first code of a given ³
³ cheat code (validator code). You can also put .COD files on a DVD and ³
³ load cheat codes from there, each file corresponds to one game. ³
³ ³
³ Cheat codes are working for backups and original games. ³
³ ³
³ ³
³ -[MULTIBOOT DISCS]---------------------------------------------------- ³
³ ³
³ The MultiBoot features let you put several games on one disc. ³
³ You can use Viper_Multi_Boot_ISO_Creator by LoonyCube to create ³
³ MultiBoot discs easily. Technical info can be found in Cobra 1.1 NFO. ³
³ ³
³ ³
³ -[COBRA PLUG-IN SYSTEM]----------------------------------------------- ³
³ ³
³ A plug-in is a small application that stays into Viper GC memory and ³
³ can be executed from Cobra main menu. ³
³ ³
³ You can load plug-in (.CBP) from DVD Explorer. ³
³ ³
³ Another possibility is to embed the plug-in into the Cobra .VGC file. ³
³ To do so you must append the plug-in to the Cobra .VGC file. Use the ³
³ following DOS command line: "copy /b cobra.vgc+plugin.cbp out.vgc" ³
³ You can then reprogram your Viper GC with the file "out.vgc" using the ³
³ Viper GC Programmer or Cobra Disc Explorer. ³
³ ³
³ To create your own plug-in from a .DOL file, use the supplied program. ³
³ Plug-in files (.CBP) can't be bigger than 45056 bytes but their ³
³ corresponding executables (.DOL) can be a lot bigger, as plug-in are ³
³ compressed. You can distribute your plug-in by sharing the .CBP file, ³
³ but you're also free to distribute the Cobra .VGC file with your ³
³ plug-in embedded! ³
³ ³
³ ³
³ -[TECHNICAL INFO FOR DEVELOPERS]-------------------------------------- ³
³ ³
³ It is now possible to let the user change discs in your homebrew ³
³ program. To do so, stop the disc using the usual E3 immediate command. ³
³ Don't reinit the drive as usual to load the new disc. Instead call E5 ³
³ command in DMA-read mode (read 0x20 bytes and discard them), followed ³
³ by an immediate E0 immediate read command (discard the result). It ³
³ works just as the reinit command would, so you must read the new Disc ³
³ ID before reading anything else. ³
³ ³
³ Technical info about MultiBoot disc format can be found in Cobra 1.1 ³
³ NFO File. Official .COD file sample can be found in Cobra 1.0 ZIP file. ³
³ ³
³ ³
³ -[THE FUTURE]--------------------------------------------------------- ³
³ ³
³ As usual, much more to come :-) ³
³ ³
³ ³
³ -[CLOSING WORDS]------------------------------------------------------ ³
³ ³
³ Special thanks to E*Flash for his help, RoM for the early units, ³
³ Melan for the /48 GC, ATH for the Panasonic Q and to everybody that ³
³ tried Cobra V1.1 and posted constructive feedback. ³
³ ³
³ You are free to redistribute this package as long as it's not changed, ³
³ patched, ported, or whatever. ³
³ ³
³ Our code is free of any copyrighted code from third party. ³
³ It is also free of any GPL licensed code, we have strong respect for ³
³ other people's hard work. We only ask you to show similar respect ³
³ toward our work. To put it in other words, if you are in the "right" ³
³ side, draw the line between learning and stealing. Thank you. ³
³ ³
³ Enjoy! ³
³ ³
³ ° ° ° ³
ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ±² ÄÄÄÄÄÄ ±² ÄÄÄÄÄÄÄÄÄÄ ±² ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´
³ °ÛßÜÜ °Ûßß ÜÛßß ²Ûß ßßÜ ²Û °ÜßÛ °Ü Û ²ÛßÛ °Ûßß ³
³ ÛÛ Û Û ÛÛß ÛÛ Û ÛÛ ²ÛßÛ ÛÛ ÛÛ Ü ÛÛ Û ÛÛ Û ÛÛß ³
³X ° ± ² Û ²Û ² Û ßÛ²Û ÛÛ ² ßÛ²± ßÛÛ² ßÛÜ ßÛ²Û ßÛ²Û ÛÛ²ß ßÛ²Û Û ² ± ° X³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ