------------------------------------------------------------------
Birdy Hitachi friendly Flasher with Xtreme v1.2 All versions
------------------------------------------------------------------
RELEASE INFO:
Friendly Flasher (Windows application) for Hitachi drives
Includes Xtreme hack 1.2 for All versions
FEATURES:
- Auto-Detect Hitachi Drive connected to Windows and its
firmware version
- Can restore / flash with user friendly interface
- Auto Retry if flashing or restoring fails
- Auto Verify if Flash / Restore went sucessfully
- Xtreme Hack 1.2 contains all the goodies mentioned on
previous releases (see releases from birdy and garyopa)
Currently I am working on merged version with the F900 (extract
security sectors) and with a Stealth mode. Stay tuned.
Technical details
-----------------
Security sectors are read in this order:
Reads Xbox 360 security sector from PSN 04FB1F (Layer 0)
Reads Xbox 1 security sector from PSN 605FF (Layer 0)
Reads Xbox 360 security sector from PSN FD021E (Layer 1)
Flashes sector 9003e000 (Master Checksum)
Flashes sector 90035000 (Security Sector Read)
Flashes sector 9001c000 (Drive Response Table Decrypt)
Flashes sector 90003000 (Custom Code)
Flashes sector 90027000 (Challenge Response) (v46/v47/v59)
Flashes sector 90026000 (Challenge Response) (v32/v36)
Flashing your drive
-------------------
* This application automatically makes a backup of your firmware and asks for save
location.
** Make sure you are flashing over an ORIGINAL image on your drive, if needed first
do a RESTORE. Undesired results can be achieved if you flash over a previously
flashed image.
- Plug SATA cable from DVD drive to PC
- Power cable drive still connected to Xbox 360
- Ensure drive is in mode b either by two wire trick or slax linux boot cd
- Go to Windows
- Run hitachiflash.exe and if the drive is properly connected it should get detected
- Choose the Action: "Patch your firmware with xtreme 1.2"
- Hit go and wait,
- There will be a prompt asking where you want to place the backup of the original
firmware (before patching)
- The flash must start, if some "retry" windows appears hit YES/OUI until finished
- At the end the application will check for 100% so you can shut down the system
Thats all
Restoring your drive (Requires previously saved Firmware Image)
---------------------------------------------------------------
- Plug SATA cable from DVD drive to PC
- Power cable drive still connected to Xbox 360
- Ensure drive is in mode b either by two wire trick or slax linux boot cd or if you
have the Xtreme 1.2 then use the TWEAK starting the box with the tray opened
- Go to Windows
- Run hitachiflash.exe and if the drive is properly connected it should get detected
- Choose the Action: "Restore Original firmware"
- Hit go and wait,
- There will be a prompt asking for your original UNENCRYPTED image
- The restore must start, if some "retry" windows appears hit YES/OUI until finished
- At the end the application will check for 100% so you can shut down the system
Thats all
Citera
Bookmarks