Från BRADKB, en av utvecklarna av NEO4:
Basically our mod has a piece of custom wrote software developed by the NEO4 team. When the PS2 gets switched on, our mod monitors the loading process of the PS2 "Operating System" and when it gets to certain parts, it switches off the PS2 and switches ours on, this is seamless to the PS2.
Pins 1-11 are Address lines
Pins 12-20 are Data Lines
Pin 21 is Chip Enable for the PS2 Rom
Pins 22-32 are Address Lines
Pin 33 is the PS2 Chip Enable signal
Pin 34 is SCEE Management
Pin 35 is Clock signal
Pin 36 and 37 are +5V and Earth
38 is BA Pin2
39 is BA Pin1
40 is Eject Detect
41 is Motor Enable
42 is Macro 1
43 is Macro 2
44 is PS2 Output Enable
Hope that sums it up.
__________________
Brad
Bookmarks