http://www.ps3key.com/en/support/faq/
Kanske hjälper, även denna del:
How do I get PS3Key into bootloader mode in order to update it?
Applies to: PS3Key
This procedure is different depending on whether you have an Atmel-based
PS3Key or a Silabs-based PS3Key:
Atmel-based:
Connect and disconnect PS3Key to a USB port on your PC 3 times within 10 seconds.
Then both LEDs (blue and red) will then come on at the same time. The Update
button in the software will no longer be disabled and you will be able to click it to
apply the update.
Silabs-based:
Connect PS3Key to a USB port on your computer and wait for 15-30 seconds.
Both LEDs will come on, and PS3Key will appear as a USB memory stick. You will be able
to apply the update by dragging and dropping the update FIRMWARE.BIN onto
the memory stick.
Människor som inte tänker ordentligt har inga hjärnor,
snarare har de grått ludd som har flugit in i huvudet på dem av misstag.
/Nalle Puh
Bookmarks