Xbox 360 reset glitch hack v1.00

[AFX3D]

1- List of folders and what they are for:

\common : Common files between slim 360s and fat 360s.
\common\lptjtag_programmer : Schematics for a simple cpld programmer using PC LPT parallel port. You need to power both the programmer and the CPLD with 3.3 volts.
\common\imgbuild : Python script to build a NAND flash image.
\common\cdxell : Replacement CD that runs Xell, CDjasper is for jaspers and CD is for anything else.
\common\xell : Xell image, reset glitch hack version.
\fat : Files for fat 360s.
\fat\glitch48nofullpost : CPLD code, one for each hardware revision.
\fat\wiring : Schematics and pictures.
\slim : Files for slim 360s.
\slim\glitchslimnodp : CPLD code.
\slim\wiring : Schematics and pictures.

2- Basic procedure for fat 360s (zephyr, jasper)

2.1- Program the CPLD using Xilinx Impact, a CPLD programmer of your choice and the JED file for your 360 hardware revision.

2.2- Wire your 360 using the schematics and pictures located in /fat/wiring

- If you are using a CMOD board, don't forget to remove R2 and short R3 on it.
- Wire ground with thicker wire.

2.3- Build the NAND image, eg for a jasper the command should be something like:

python common\imgbuild\build.py original_nand.ecc common\cdxell\CDjasper common\xell\xell-gggggg.bin

(You need to dump your NAND prior to that)
(If you don't have a jasper, you'll need a copy of a stock plaintext jasper SMC (v2.3) )

2.4- Flash the resulting output\image_00000000.ecc using the NandPro +w command.

3- Basic procedure for slim 360s (trinity)

3.1- Program the CPLD using Xilinx Impact, a CPLD programmer of your choice and the JED file for your 360 hardware revision.

3.2- Wire your 360 using the schematics and pictures located in /slim/wiring.

- If you are using a CMOD board, don't forget to remove R2 connect upper pad of R2 to lower pad of R1 on the CMOD.
- Wire ground with thicker wire.

3.3- Build the NAND image, eg the command should be something like:

python common\imgbuild\build.py original_nand.ecc common\cdxell\CD common\xell\xell-gggggg.bin

(You need to dump your NAND prior to that)

3.4- Flash the resulting output\image_00000000.ecc using the NandPro +w command.

4- Enjoy your hacked 360 =)

5- Credits:

GliGli, Tiros: Reverse engineering and hack development.
cOz: Reverse engineering, beta testing.
Razkar, tuxuser: beta testing.
cjak, Redline99, SeventhSon, tmbinc, anyone I forgot... : Prior reverse engineering and/or hacking work on the 360.

----

Är det nått helt nytt detta? Kan jag fixa JTAG för xbox slim nu alltså? Hittade på TL.
mvh

[Swizzy]

Är det nått helt nytt detta? Kan jag fixa JTAG för xbox slim nu alltså? Hittade på TL.
mvh

Japp, det kom idag

http://forum.psxcare.com/support/sho...8-är-deta-sant <--- den tråden handlar om samma sak

[AFX3D]

Japp, det kom idag

http://forum.psxcare.com/support/sho...8-är-deta-sant <--- den tråden handlar om samma sak

Coolers. Ska läsa. Tackar

edit: Lite synd att man köpte sin slim hos er så tidigt, typ precis när ni började sälja dom.
Vill ju ha JTAG. Men palla inte köpa gammal xbox pga RROD skiten...

Hoppas ni sätter upp ett bra pris om man vill lämna in den för modifiering senare..
Jag köpte den första xbox360 hos er när den kom ut med ju. Men det var ett tag sen nu

Kan ha köpt första xboxen med hos er, ja, det stämmer nog. Köpte första xboxen med, så detta blir den 3:e
Första var jävligt rolig. Media center, emulatorer och allt cleant. hade riktigt roligt med den och då var jag mer duktig på tekniska saker.
Babbel babbel. Men kul att det blir JTAG på slim. Nu soove.