Visar resultat 1 till 2 av 2

Diskussion: Howto save Iphone IOS 7.0.6 SHSH blobs with Windows

  1. #1
    Registrerade
    Aug 2000
    Från
    Stockholm, Sweden
    Inlägg
    22 483
    Respekt
    10

    Howto save Iphone IOS 7.0.6 SHSH blobs with Windows

    I had some difficulties finding an easy way to save the SHSH blobs for an Iphone 4S with IOS 7.0.6 yesterday.

    Ifaith, Tinyumbrella, redsn0w and such tools just did not seem to be updated to handle this version at the moment.

    I found a python script called SAVETHEMBLOBS
    https://github.com/Neal/savethemblobs

    but it did require some tinkering to figure out how to get it to run on my Windows 7 PC.

    The version of python that I had installed did not have a certain module installed, and the automated module installation tool was not available for my version.

    Error message: No module Named requests

    So I downloaded and installed the 32 bit version of python 3.3.4. Make sure you allow the installer to add the python executables directory to the windows search path unless you understand how to run the python script without the path set.

    http://python.org/ftp/python/3.3.4/python-3.3.4.msi

    Then I downloaded and installed setuptools 2.2 for python version 3.3. Not sure if it was actually needed/missing from the python installation I did.

    http://www.lfd.uci.edu/~gohlke/pythonlibs/#distribute
    Look for "setuptools‑2.2.win32‑py3.3.exe"

    I had to open a COMMAND box with administrator priviligies. Click the Windows start "flag" thingy, write COMMAND in the search box, look for the "command prompt", RIGHT click and run as administrator.

    Then, depending on where your Python is installed, do something like this in the command prompt windows:

    c:
    cd \python33\scripts
    easy_install requests

    If the output from the command looks free from errors you should be ready to run the getghemblobs.py script.

    You need to put your iphone in DFU or restore mode to find out what to write as the ECID parameter
    http://osxdaily.com/2010/06/24/iphon...n-your-iphone/

    Then there are several guides to follow. I found my ECID in the device manager, but this guide seem to be easier to use
    http://www.iphoneheat.com/2010/04/iphone-ipad-ecid/

    (In device manager, i found the "Apple Mobile Device USB driver" under "USB-Controllers" (My windows is swedish, so actually USB-styrenheter), right click, select properties, click the information tab, and find the property "path to device instance" or similar (Sökväg till enhetsinstans in swedish), look for a value similar to "USB\VID_05AC&PID_1227\CPID:8930_CPRV:20_CPFM:03_S CEP:01_BDID:00_ECID:00000123456789A_IBFL:00_SRTG:[IBOOT-574.4]" and in this example the ECID would be 00000123456789A)



    You also need your iphone identifier string, I found out mine using this table

    http://www.icj.me/ios/all#iPhone41

    As I was working with an Iphone 4S, i used "iPhone4,1" as the identifier. In the table, that is the first part of the name of the downloadable ipsw file such as "iPhone4,1_7.0.6_11B651_Restore.ipsw"

    Iphone 4 (not S) seem to have iPhone3,1, iPhone3,2 or iPhone3,3 as the identifier depending on which network version (GSM/CDMA)



    Put the phone back in normal mode if you are still in DFU mode by pressing both home and power until it rebbots. Also exit itunes if you have that running.

    In the command line box, CD to the directory where you stored your savethemblogs.py script and type

    savethemblogs.py 0x################ iPhone4,1

    (replacing the "#####################" with your ECID and "iPhone4,1" with your own phone model. Keep the "0x" though, unless you have your ECID in decimal form instead of hexadecimal.

    I hope you found this guide more helpful than confusing :-)
    Last edited by Hansi; 2014-03-06 at 14:35.
    Läs forumets avdelning för Vanliga Frågor Och Svar, XBOX Guider eller prova forumets SÖKFUNKTION - Dina vänner här i forumet orkar kanske inte formulera ännu ett svar på en fråga som redan är avhandlad flera gånger tidigare. Titta hur många inlägg jag skrivit - försök hitta på en fråga jag inte svarat på redan...

  2. #2
    Registrerade
    Aug 2000
    Från
    Stockholm, Sweden
    Inlägg
    22 483
    Respekt
    10
    Starting today, the above method will save the IOS 7.1 blobs, not 7.0.6. There is no way to sign 7.0.6 anymore.
    Läs forumets avdelning för Vanliga Frågor Och Svar, XBOX Guider eller prova forumets SÖKFUNKTION - Dina vänner här i forumet orkar kanske inte formulera ännu ett svar på en fråga som redan är avhandlad flera gånger tidigare. Titta hur många inlägg jag skrivit - försök hitta på en fråga jag inte svarat på redan...

Liknande diskussioner

  1. iPhone
    By Xager in forum PSP - Playstation Portable
    Inlägg: 11
    Senaste inlägg: 2008-09-15, 20:02
  2. iPhone
    By Xager in forum PSP - Playstation Portable
    Inlägg: 6
    Senaste inlägg: 2008-03-27, 21:25
  3. D2B med avklippta ben howto
    By stupid in forum Nintendo WII - Allmänt
    Inlägg: 3
    Senaste inlägg: 2007-07-24, 14:03
  4. kolla in de här "Howto flash x360 drive without opening console"
    By istallion in forum XBOX 360 - Allmänt
    Inlägg: 2
    Senaste inlägg: 2006-09-09, 14:44

Bookmarks

Behörigheter

  • Du får inte starta nya diskussioner
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •