===============
Edit: Nu har det äntligen kommit en fungerande chip till Gamecube, så man kan köra spel från mini-dvd-r eller dvd-r skivor
Mer om det i forumet:
http://forum.psxcare.com/support/showthread.php?t=19178
Prylar i webshoppen:
http://www.psxcare.com/section.php?xSec=29
Viperchip downloads:
http://forum.psxcare.com/support/showthread.php?t=20019
===============
Nu har det publicerats sådan programvara och information som gör att man kan ladda både kommersiella spel och hemgjorda program över nätverket från sin PC och köra dom på en GameCube med nätverksadapter.
Man behöver spelet Phantasy Star Online, vilket utnyttjas för att ladda in en "bootloader" som i sin tur kommunicerar med ett program man kör i sin PC för att ladda spelets image över nätverket.
Från max************:
How to load Gamecube games over a LAN
posted by malloc at 05:18 pm on 13-10-2003
How to load Gamecube games over a LAN
Written by B0B - some text taken from the PSUL documentation
Files needed:
=============
. PSUL 1.1 - Gamecube Code Uploader (c) Titanik/CZN
. EUR-ACL1.EXE - ******* PC Animal Crossing Loader 1.1
. EUR-ACL1.DOL - ******* GC Animal Crossing Loader 1.1
. EUR-ACGC.GCM - Animal Crossing image
Extra Hardware/software needed:
===============================
. Phantasy Star Online 1&2 'PSO' (USA,JAP,EURO)
. Nintendo Broadband Adapter,
. PC to GameCube cable (UTP CAT5),
. PC Ethernet card
Initial Setup:
==============
In Windows, Go to Control Panel/Network/LAN Connection/TCPIP properties
and change the PC IP address to 192.168.1.100, subnet should be 255.255.255.0
In Phantasy Star Online..
1) In Main Menu, go to Options -> Network Option -> Provider Option
2) Go to Network Setup in the Network Setup Menu
3) In Select network Information settings, hit Edit
4) In Edit ISP name, you don't need to change anything
5) In Ethernet settings, choose
- Manually set an IP address
- Do not automatically disconnect
6) In IP address manual-settings put
- IP address: 192.168.1.32
- Subnet mask: 255.255.255.0
- Default router: 192.168.1.100
- Primary DNS: 192.168.1.100
- Secondary DNS: leave it blank
- DHCP Hostname : Not set
7) In Browser settings, you don't need to change anything
8) Hit save to save all the net info, and you can go back to main menu.
First connection
----------------
The purpose of the first connection is to let PSO save the user info into
the memcard so you don't have to enter them every time... If you already
played PSO online, you don't need to do that.
In Windows, open up Command Prompt/DOS
- run psul -s
- In Main Menu, choose Online game, and create a new character
- Enter any Serial Number, Access Key and Password (you won't have to
remember them), and skip the useless menus
- Save the Password to the memory card when prompted
- The GC should connect to the PC and you should get this message on PC :
Saving user info on memory card...
Done... Now everything should be set up!!
To upload a Gamecube game:
==========================
In windows, Create a desktop icon for PSUL.EXE, and EUR-GCAL.EXE, then you can drag the loader file and the game files over the desktop icons to upload them to the Gamecube.
If you dont do that, then you have to go into Command Line DOS to use them.
- Drag the gamecube game image onto the EUR-GCL1.EXE icon, to initiate sending.
(or From DOS Run: EUR-GCAL.EXE EUR-ACGC.GCM)
- Start psul with the file EUR-ACL1.DOL (by dragging EUR-ACL1.DOL onto the PSUL icon)
- Turn on Gamecube and load Phantasy Star Online,
- Go into Online gaming, and choose the character you made. PSO will
then connect to the PC and loader will be uploaded and run.
- The ******* intro will boot on GC, you can change boot method
from A/B using D-pad. Press START to boot.
If everything is working correctly the DOS screen will begin
to fill with dots. The TV screen should go from loading, black,
Red Nintendo Logo, black screen, sound, title screen, music.
On some sytems the entire game will load in 1 minute, on other
systems this process may take several minutes! Please be patient,
As long as dots are filling the DOS screen then Animal Crossing
is loading.
If you are having problems with hanging, or the console is filling
up with X's and transfer rate is very slow, try using the delay
switch to slow down transfer rate from PC.
Delay usage from command line: eur-acl1.exe eur-acgc.gcm -d10 -f16
Delays for 10ms every 16 packets.
If no -f switch is given the frequency of delay will default to
every one packet which is far slower and perhaps no more reliable
that a given frequency value. Experiment to find the optimum
settings for your system if you are having long loading times.
Citera
Paket!
Bookmarks